Leather Arrow Quiver Kit 0612145700

Leather Arrow Quiver Kit

The finished quiver is approximately 43 cm long and has a diameter of approximately 8 cm.

This kit contains:
1 main part, 1 waistband, 1 bottom part, 1 ribbon, 3 leather cords

Instructions:
This quiver can be used by both left and right handed people. Knot one end and bevel the other end of the rope.

(Photo 2) Place the waistband on the main part and thread the cord through the holes from the inside out. When you get to the end, tie a knot at the end of the cord and cut off the excess. There are holes on the left and right next to the neck. You will need these holes to attach the quiver later.

Turn the main part over and first sew the 4 bottom holes crossed (picture B). Now match the holes in the base with those in the main part so that the holes in the main part are separated from the holes in the base and sew the two from the inside out. The seam should now run at an angle.

Once inside, tie a double knot at the end of the cord. Now attach the cord. Use either the right or left holes. The side of the ribbon with the 4 holes is attached to the top of the quiver. Fold the band so that the harder side of the leather is facing outwards. The other end has 8 holes. These are used to set the desired length. Then thread the last cord from the inside through the remaining bottom holes and through the two matching holes in the ribbon and finally knot the cord.

At EspadasYMás we have the best bows for your collection. Professional bows, recreation bows, medieval bows, practice bows, accessories and much more.